ACME iSolution Specifications

Technical Specifications IR-7S/IR-7B/IR-5C Power AC 120V~60Hz or AC 230/240/250V~50/60Hz Fuse 20mm Glass 10A Fast Blow Lamp MSD 250/2 GY9.5 Dim

10F 4.2 Main Function To select any of the given functions, press the MENU button up to when the required one is showing on the display. Select the

11F 5.2 Easy Controller The easy remote control is used only in master/slave mode. By connecting to the 1/4” microphone jack of the first unit, yo

12F Dimmer Inversion Press the MENU button up to when the is shown on the display. Pressing ENTER button and the display will blink. Use DOWN and

2F. TABLE OF CONTENTS 1. Safety Instruction 2. Technical Specification 2.1 Inserting/Exchanging rotating gobos 2.2 Beam Angle 3. Lamp 4.

3F 6. Troubleshooting Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: A.

4F. Warning ¤ To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture. ¤ Never touch bulb with bare

5FIS-3 2. Technical Specification • Voltage：AC 120V~60Hz or 230V/240V/250V~50/60Hz • Bulb：MSD 250/2 GY9.5 (IR-7S/IR-7B/IR-5C) C

6F 2.1 Inserting/Exchanging rotating gobos ( For IR-7S/IR-7B/ IR-5C only ! ) DANGER! Install the gobos with the device switched off only. Unplug

7FIR-6SD/IR-6BD/IR-6S/IR-6B/IR-5S/IR-5BIR-4C ( IR-4C is a 4 channel color changer) 2.2 Beam Angel

8F 3. Lamp MSD 250/2 GY 9.5 (IR-7S/7B/IR-5C) CDM 150W ( IR-6SD/ IR-6BD ) ELC 24V 250W (IR-6S/IR-6B/IR-5S/IR-5B/ IR-4C/IS-6S/IS-6B/IS-4/IS-3)

9F65. 4 DMX512 Configuration 4. How To Set The Unit 4.1 Control Panel Display To show the various menu and the selected funct